News from NACE International

Submitted by Trudy Schreiner, Committee Liaison/Editor, NACE International  - March 22, 2017

NACE RECENTLY PUBLISHED STANDARDS

NACE staff recently published the following new and revised industry standards. These and other NACE standards and reports are available through the online NACE Store.

SP0198-2016, “The Control of Corrosion Under Thermal Insulation and Fireproofing Materials—A Systems Approach.” Item No. 21084  (Reaffirmation)

SP0206-2016, “Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas (DG-ICDA).” Item No. 21112 (Revised)

SP0216-2016, “Sacrificial Cathodic Protection of Reinforcing Steel in Atmospherically

Exposed Concrete Structures.” Item No. 21403 (New)

SP0273-2016, “Handling and Proper Usage of Inhibited Oilfield Acids.” Item No. 21009 (Revised)

SP0287-2016, “Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape.” Item No. 21035 (Revised)

ANSI/NACE SP0300-2016/ISO 16784-1-2006, “Corrosion of metals and alloys-Corrosion and fouling in industrial cooling water systems-Part 1: Guidelines for conducting pilot scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems.” Item No. 21092 (Revised)

SP0391-2016, “Materials for the Handling and Storage of Commercial Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures.” Item No. 21050 (Revised)

SP0492-2016, “Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes.” Item No. 21056 (Revised)

TM0105-2016, “Evaluation of Coatings Containing Conductive Carbon Pigmentation for Use as an Anode on Atmospherically Exposed Reinforced Concrete.” Item No. 21247 (Reaffirmation)

TM0106-2016, “Detection, Testing, and Evaluation of Microbiologically Influenced Corrosion (MIC) on External Surfaces of Buried Pipelines.” Item No. 21248 (Revised)

TM0172-2015, “Determining Corrosive Properties of Cargoes in Petroleum Product Pipelines.”

Item No. 21204 (Revised)

TM0186-2016, “Holiday Detection of Internal Tubular Coatings of 250 to 760 mm (10 to 30 mils) Dry Film Thickness.” Item No. 21218 (Revised)

TM0193-2016, “Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Below 93 °C.” Item No. 21223 (Revised)

TM0198-2016, “Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloys for Stress Corrosion Cracking in Sour Oilfield Service.” Item No. 21232 (Revised)

ANSI/NACE TM0284-2016, “Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking.” Item No. 21215 (Revised)

TM0294-2016, “Testing of Embeddable Impressed Current Anodes for Use in Cathodic Protection of Atmospherically Exposed Steel-Reinforced Concrete.” Item No. 21225 (Revised)

TM0316-2016, “Four-Point Bend Testing of Materials for Oil and Gas Applications.”

Item No. 21404 (New)

TM0374-2016, “Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems).” Item No. 21208 (Revised)

TM0384-2016, “Holiday Detection of Internal Tubular Coatings of Less Than 250 mm (10 mils) Dry Film Thickness.” Item No. 21216 (Revised)

ANSI/NACE TM0416-2016, “Test Method for Monitoring Atmospheric Corrosion Rate by Electrochemical Measurements.” Item No. 21405 (New)

NACE No.12/AWS C2.23M/SSPC CS-23, “Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel.” Item No. 21100 (Revised 2016)

About NACE International: Founded in 1943, NACE International, The Corrosion Society, serves 36,000 members in 130 countries. Based in Houston, Texas, with offices in the U.S., China, Malaysia, India, Brazil and Saudi Arabia, and a training center in Dubai, the organization serves all industries impacted by corrosion and provides the most specified technical training, conferences, industry standards, and reports focused on corrosion prevention and mitigation.